Industrial grade RS485 NO3-Nitrate sensor electrodes can be
replaced for long term online water quality monitoring
Overview
Online nitrate sensor requires no reagents, is environmentally
friendly and pollution-free, and can be monitored online in real
time.
Integrate nitrate ion, sodium ion (optional), and reference
electrode,
automatically compensate temperature in the water. It can
be directly put into installation, which is more economical,
environmentally
friendly, convenient and quicker than traditional nitrate
analyzers. The
sensor has excellent reliability, adopts RS485 output, supports
Modbus,
and is easy to integrate.
Features
Digital sensor, RS-485 output, support MODBUS
More economical and environmentally friendly, can be monitored
online in real time
Automatically compensate temperature in water
High precision and high stability.
| Item | Parameters |
| Model | DSN260 |
| Ammonia Nitrogen Range | 0~1000mg/l |
| Ammonia Nitrogen Precision | 3% |
| Ammonia Nitrogen Resolution | 0.1mg/l |
| Nitrate Range | 0~50mg/L |
| Nitrate Precision | 5% |
| Nitrate Resolution | 0.1mg/l |
| pH range | 1~12 |
| pH Accuracy | ±0.1 |
| pH Resolution | 0.01 |
| Deepest depth | Underwater 10m |
| Protection level | IP68 |
| Temperature range | 0~50 |
| Sensor interface | Support RS-485, MODBUS protocol |
| assembly | Input type |
| Power information | DC 5~12V, current <50mA |
| Probe cable length | 10 meters (default), can be customized |
| Housing material | POM |
Precautions
The probe contains sensitive optical and electronic components.
Ensure that the probe is not subject to severe mechanical impact.
Damage to the sensor due to impact or manpower will not be covered
by the warranty. Water ingress to the sensor due to replacement of
the pH electrode is not covered by the warranty.
Maintenance schedule and method
Maintenance schedule
It is recommended to periodically calibrate or clean the sensor
surface according to the actual application scenario.
| Maintenance tasks, | Recommended maintenance frequency |
| Calibrate the sensor (if required by the competent authority) | According to the maintenance schedule required by the competent
authority |
Maintenance method
Sensor maintenance
1) External surface of the sensor: Wash the external surface of the sensor with tap water. If debris
remains, wipe it with a moist soft cloth.
2) Check the cable of the sensor: The cable should not be tight during normal work, otherwise the
internal wires of the cable will be easily broken and the sensor
will not work properly.
3) Sensor storage: When the sensor is not in use, you should fasten the black plastic
cap and check whether the sponge inside is wet. If it is not wet
enough, please add 3mol / L potassium chloride solution and let the
electrode be stored in the solution with potassium chloride.
Quality assurance
Our company assures its first-hand buyers that there will not be
any product defects caused by substandard materials or factory
manufacturing in the 3 months after shipment.
If a defect is found within the 3-month warranty period, Desun
Uniwilli Electronics promises to repair or replace the defective
product or return the payment in addition to the first shipping and
related formalities. Any product repaired or replaced during the
warranty period will only enjoy the remaining warranty period of
the original product.
This warranty does not apply to consumables such as consumable
parts (including but not limited to lamps, pipes, etc.).
Contact Desun Uniwill Electronics or your agent to begin technical
support during the warranty period.
After receiving the customer's questions about product quality, our
company will confirm whether the product needs to be repaired
within two weeks; products that have not been approved for repair
cannot be returned.
