Home > Electrical Conductivity Sensor >

Marine Aquaculture Ec Sensor IP68 Output RS485 OEM Six Electrode

Product Categories

Dissolved Oxygen Sensor [32]
Optical Dissolved Oxygen Sensor [20]
Water Dissolved Oxygen Sensor [20]
Chemical Oxygen Demand Sensor [37]
Dissolved Oxygen Meter [50]
NH4 Sensor [24]
Digital PH Sensor [13]
Electrical Conductivity Sensor [12]
Oil In Water Sensor [40]
Water Turbidity Sensor [13]
Multiparameter Water Quality Sonde [20]
Suspended Solids Sensor [14]
Blue Green Algae Sensor [23]
Oxidation Reduction Potential Sensor [13]
Water Nitrate Sensor [15]
Water Quality Analyzer [5]
Ion Sensor [2]

Xi'an Desun Uniwill Electronic Technology Co., Ltd.

Contact Now

Marine Aquaculture Ec Sensor IP68 Output RS485 OEM Six Electrode

Ask Lasest Price
Brand Name :	Desun Uniwill
Model Number :	DSC480
Price :	Determined by the number of specific orders
Payment Terms :	L/C, D/A, D/P, T/T
Supply Ability :	1000

Add to Cart

Product Details
Company Profile

Marine Aquaculture Ec Sensor IP68 Output RS485 OEM Six Electrode

The new EC conductivity sensor for marine aquaculture output RS-485

Product Description

Description

Digital conductivity sensor adopts a new generation of four-electrode/six-electrode technology, with wide measurement range, automatic switching measurement range, built-in temperature sensor and real-time temperature compensation. It has excellent anti-pollution ability and will not cause polarization even in the harsh environment for long-term online monitoring. RS485 output, can be networked without a controller.

Technical parameters

Product name	Four-electrode conductivity sensor		Six-electrode conductivity sensor
Model	DSC480	DST481	DST482
Range	1uS/cm~200 mS/cm	1uS/cm~100 mS/cm	1uS/cm~300 mS/cm
Conductance accuracy	±1%
Resolution	1uS/cm
Response time	<2 sec
Protection level	IP68
Max operating pressure	6 bar
Temperature range	0~ 50°C
Sensor interface	Support RS-485, MODBUS protocol
Installation	Input type
Power supply	DC 6~12V, current <50mA (when not cleaned)
Temperature Sensor	NTC
Electrode material	Nickel
Housing material	PEEK
Probe cable length	5 meters (default), can be customized
Size	Φ 22 *165mm
Calibration	One or two point calibration

Installation
Before installation, please check the appearance of the cables for damage, and disperse the cables.
1,When using the submersible sensor, avoid the sensor hitting the wall
or other facilities caused by the water flow. If the water flow rate is too fast, the sensor must be fixed.
2 , There should be no obstructions in front of the measurement. For example, fluorescence sensors should be avoided from light.

3,The water depth at which the sensor is installed should not exceed 2 meters from the horizontal, and the water depth at the installation location should not be less than 30 cm according to the fluctuation of the water flow. (Adjustable according to the measured water body)
4, The sensor should be installed in a location where there is no air bubbles to prevent air bubbles from affecting the measurement data of the sensor..
5, Do not use the sensor's own cable to hoist the sensor, and install a cable protection device to prevent excessive tension between the cable and the sensor, causing the cable to break.
6, The sensor should not be installed with the measuring side facing upwards, it can be installed vertically downwards or horizontally.
7, If you use this product in a flow cell, please consult the company's sales staff to confirm the specific installation requirements.

Detailed Images

Our Service

* Standardized workshop and process
* Strict professional quality inspection
* Return is supported if the product is unqualified.
* Fast delivery
* Warranty for 1 years

FAQ

Q: Can you do OEM service ?A: We can provide the specific products needed around the world at
significantly lower costs.
If you need further information regarding our OEM or Private Label
programs, please contact us freely.
Q: How long is your delivery time?A: Usually, delivery time is 10-15 days depend on the order
quantity & inventory.
Q: How about your quality warranty ?A: Normally all products are supplied with a warranty of 12 Months
from the date of shipment.
Q: What is your terms of payment ?A: Payment 100% T/T, Western Union, L/C, Trade Assurance, Credit
Card ect. in advance ,before shippment.

Product Tags:


*From:	Your email address is incorrect!
*To:	Xi'an Desun Uniwill Electronic Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!